"REMOVE GRAFFITI LIKE A PRO"
1GL 5GL 55GL
"TAKE BACK YOUR CITY"
CONCRETE-MASONRY GRAFFITI SHADOW REMOVER
Precautions: FLAMMABLE LIQUID. Follow good safety practices. Use in well vented areas. Causes eye and skin irritation. Do not take internally. May be harmful or fatal if swallowed. Do not pour unused materials back into original
container. Always wear protective rubber gloves, proper clothing and face shield/goggles while using this product. Do not dispose of cleaning residue, debris, soaked-cleaning towels or product containers in storm drains, streams and lakes, dispose of according to local, state and federal ordinances. Paint residue, soaked-cleaning towels, if not handled properly may cause spontaneous combustion. Always wash hands with clean water after handling product. WARNING!: LEAD: If you scrape, sand, or remove old paint, graffiti taggings, etc. you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN.
PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator and use a HEPA vacuum to clean up. For additional information call (800) 424-5323 or go to www.epa.gov/lead. KEEP OUT OF REACH OF CHILDREN. For Leak, Fire or Medical Emergencies Involving Humans and
Animals Call 1-800-633-8253 (#11432) For SDS.
Remove Graffiti-Shadowed Spray-Paints, Primers, Markers & Wax Crayons
From Concrete-Masonry, Brick, Stone, Cinder-Block, Slip-Face Surfaces
Envirotek
GraffitiRemovers
WARNING: Causes eye and skin irritation.
Keep out of reach of children. See back panel for additional precautionary
and practical treatment statements. For Industrial Use Only
800 533 9317
EnvirotekCorporation Los Angeles CA
Net :1GL 5GL 55GL
Directions: Use Shadowmaster full strength. Brush or spray directly onto graffiti-shadowed areas. Apply Shadowmaster 2 to 3 times; soaking the shadowed area thoroughly. Allow to penetrate for 10 to 20 minutes - longer in colder weather. Repeat process, completely soaking shadows, ghosts, residue areas, before cleaning. Use a pressure washer remove residue. Hot water cleaning (185°+) is preferred over cold cleaning applications. Repeat, if needed. Recommended for bare masonry-concrete, brick, stone, cinder-block, slip-face. To avoid any permanent damage, always test Shadowmaster first on a hidden area of surface to be cleaned.
